Local Garage Doors is a company that specializes in the sales and installation of LiftMaster garage door openers and remotes. They offer a wide range of products to meet the needs of their customers, including both residential and commercial grade models. All of their products are of the highest quality and are backed by a manufacturer’s warranty for added peace of mind. In addition to selling and installing LiftMaster products, Local Garage Doors also provides repair and maintenance services to ensure that their customers’ garage doors are always in good working order. Whether you need a new opener or remote, or simply need to have your existing system repaired, Local Garage Doors has you covered.
LIFTMASTER 890MAX, 893MAX & 895MAX STEP BY STEP PROGRAMMING INSTRUCTIONS



STEP 1: Verifying The Color Of Your Garage Door Operators “Learn” Button
Verify the color of the “Learn” button on the garage door opener and be sure to remember the color. Follow your garage door operators antenna that hangs down from the motor head. You might have to open the light cover. Following the antenna upward will lead you to the your motors learn button.



STEP 2: Putting Remote Control Into Programming Mode
Press and hold the program button the remote control until the LED on the front of the remote control turns on.



STEP 3: Setting Remote Control To Correct Learn Button Type
Press and release the button on your remote in which you wish to use to operate the garage door the number of times that corresponds with the garage door opener type learn button color from “STEP 1”.



STEP 4: Exit Remotes Programming Mode
To exit programming mode, press any remote control button EXCEPT the button that was just programmed.



STEP 5: Getting Your Operator (Motor) Into Programming Mode
Press and release the Learn button on the garage door opener. It’s important to remember your Operator/Motors learn button could be yellow, purple, red, orange or green. Also make sure to press and release the learn button quickly. Once the learn button is pressed, you will have 30 seconds to complete the next step. DO NOT HOLD DOWN THE LEARN BUTTON; THIS WILL CLEAR OUT ALL PROGRAMMING TO YOUR OPERATOR/MOTOR.



STEP 6: Syncing New Remote Control To The Operator (Motor)
Press the remote control button we programmed in “step 3” until the garage door opener lights flash or two clicks are heard. Once lights flash or two clicks are heard, that means programming was successful.



STEP 7: Test To Confirm
To test the new remote, press the programmed button on the remote control. The garage door and operator should activate and the garage door should start moving.



STEP 8: Visor Clip
Install the visor clip (not applicable for Model 890MAX).



If you are having issues getting your remote to program, THIS VIDEO may helpful in assisting you with the programming.
Related Articles: